RYFA / CASE STUDY

Welding machine retrofit

A new control system, welding equipment and enclosure for a shock absorber sleeve welding machine.

We retained the frame and parts of the rotary positioner. The retrofit covered the machine’s mechanical components, drives and automation.

Machine after retrofit — front view with the gate closed.
Machine after retrofit — front view with the gate closed.

01 / CHALLENGE

Retain the structure. Rebuild the working systems.

The task was to retrofit an existing automatic machine used to weld shock absorber sleeves. After inspecting the workstation, we decided to retain the frame and selected rotary positioner components. The remaining required components were designed, modified or manufactured for the upgraded machine.

02 / BEFORE

The original machine

Two views document the original enclosure and the machine’s working area.

03 / DESIGN

From the model to the machine

The design materials show the upgraded enclosure and a detail of the welding fixture. These are selected model views, not production documentation.

04 / SCOPE

Mechanical systems and automation

Welding

Fronius CMT welding power sources.

Control and drives

Siemens PLC, HMI, servo drives and safety control components.

Mechanical systems

Destaco clamping, new welding fixtures and IGUS linear units.

Enclosure

A new enclosure and an ASSA ABLOY high-speed gate.

05 / INTEGRATION

The retrofit in three stages

The work combined changes to the machine’s structure and equipment with control system integration.

  1. Inspect the existing workstation and identify the components to retain.
  2. Design and manufacture the required mechanical components.
  3. Integrate welding equipment, drives and the control system.

The photographs below show integrated components of the completed machine.

06 / AFTER

The upgraded workstation

07 / RESULT

A new equipment and control system

The existing frame and selected positioner components now work with new welding equipment, fixtures, drives and controls. The photographs document the scope of the retrofit; they do not establish measured productivity gains.

08 / NEXT STEP

Does your machine need a retrofit?

Describe the machine, its current control system and the changes you need. Together, we can discuss the scope of a technical assessment.