Technology built around your process.
Analysis, design, integration, commissioning and service. Explore what we do.
Industrial Automation
We design and commission control, safety, machine vision and drive systems, as well as control cabinets.
Industrial Robotics
We integrate industrial robots for welding, resistance welding, palletizing, pick & place, CNC machine tending and dedicated workstations.
Machine Building
We build special-purpose and custom machines, assembly lines and test stations, and modernize existing machines.
Services
We service machines, robots and drives, and provide diagnostics and remote support. We also offer 3D design in SolidWorks, schematics in EPLAN Pro Panel, and the assembly of control cabinets and switchboards.
You can also explore control systems, drives, machine vision and control cabinet assembly below.
Prepare for a technical discussion.
Describe your process and prepare the information for a technical discussion.
01
Describe the process
What should the machine do? What do you want to improve?
02
Organise the information
Parts, production volumes and constraints. You can leave unknown parameters open.
03
Discuss the requirements
The scope and feasibility require a technical discussion.
From analysis
to maintenance.
We analyse the process, design the cell, integrate the equipment and commission the system at the plant.
After implementation, we provide diagnostics, maintenance and technical support.
01
Industrial Automation

We design and commission control, safety, machine vision and drive systems, as well as control cabinets.
PLC / HMI control systems
Safety
Machine vision
Drives
Control cabinets
Automation — controls, drives and vision
Photographs and design visualizations supplied by RYFA. Select a photograph to enlarge it.






View remaining images (8)








Control cabinet assembly — automation
Photographs and design visualizations supplied by RYFA. Select a photograph to enlarge it.






View remaining images (68)




































































Electrical cabinet assembly — power systems
Photographs and design visualizations supplied by RYFA. Select a photograph to enlarge it.






View remaining images (24)
























02
Industrial Robotics
We integrate industrial robots for welding, resistance welding, palletizing, pick & place, CNC machine tending and dedicated workstations.
Welding robots and cells
Palletising systems
Assembly and pick-and-place
CNC machine tending
Purpose-built robotic cells

Robotic MIG/MAG welding
Photographs and design visualizations supplied by RYFA. Select a photograph to enlarge it.






View remaining images (25)

























Laser welding
Photographs and design visualizations supplied by RYFA. Select a photograph to enlarge it.






View remaining images (9)









Palletizing
Photographs and design visualizations supplied by RYFA. Select a photograph to enlarge it.






View remaining images (11)











Robotic machine tending
Photographs and design visualizations supplied by RYFA. Select a photograph to enlarge it.






View remaining images (18)


















03
Machine Building

We build special-purpose and custom machines, assembly lines and test stations, and modernize existing machines.
Special-purpose machines
Assembly lines
Test stations
3D design and modernisation
Control cabinet assembly
Machine building — RYFA materials
Photographs and design visualizations supplied by RYFA. Select a photograph to enlarge it.






View remaining images (1)

Machine modernization — retrofit
See the welding machine retrofit →
Photographs and design visualizations supplied by RYFA. Select a photograph to enlarge it.






View remaining images (4)




04
Services
We service machines, robots and drives, and provide diagnostics and remote support. We also offer 3D design in SolidWorks, schematics in EPLAN Pro Panel, and the assembly of control cabinets and switchboards.
Diagnostics
Machine maintenance
Robots and drives
Modernisation
Technical and remote support
Technical scope, in detail.
Five connected areas of automation. Expand the scope relevant to your process.
Control systems
We design, integrate and modernise PLC, HMI and SCADA systems using Yaskawa Controls & Motion, Omron Sysmac and Siemens SIMATIC platforms. We connect controls with drives, robots and machine vision, as well as MES/ERP, databases, OEE reporting and traceability. Our scope includes programming, FAT/SAT testing, documentation and migration of existing systems.
PROFINET, EtherCAT, EtherNet/IP, Modbus TCP/RTU, OPC UA, MQTT; WinCC, Ignition, InTouch, CX Supervisor.
Safety systems
Risk analysis, component selection, safety architecture design, integration and validation. We implement Safety PLCs, light curtains, area scanners, door interlocks and emergency stop systems. We integrate safeguards with machine and robot controls and provide documentation and training for operators and maintenance teams.
Omron, Turck, Sick; Profisafe, CIP Safety, FSoE.
2D / 3D machine vision
From trials on customer samples and selection of optics and lighting to PLC and robot integration. OCR/OCV, 1D/2D code reading, assembly verification, measurement, defect detection and positioning. We use conventional vision tools and AI/Deep Learning, with image archiving and traceability support.
Turck/Banner, Omron, Cognex, Datalogic; conveyor tracking, camera–robot calibration, FAT/SAT.
Drive technology
We select and integrate motors, servo drives, inverters and energy recovery systems. We design multi-axis systems, motion synchronisation and connections with PLC, SCADA, machine vision and safety systems. Commissioning, FAT/SAT testing, drive modernisation, diagnostics and configuration backups.
Yaskawa, Omron, Siemens, Baumüller; MotionWorks, Sysmac, TIA Portal, ProDrive. STO, SS1, SLS and SS2 safety functions are selected for the application requirements.
Control cabinet design and prefabrication
We design control cabinets and switchgear assemblies in EPLAN Pro Panel: 3D/Digital Twin models, component layouts, cable routing, bills of materials and assembly documentation. We prefabricate using RYFA-supplied or customer-supplied components, with Phoenix Contact and Partex marking. Our scope also covers cabinet modernisation and migration of documentation to EPLAN.
Yaskawa, Omron, Delta, Siemens, Phoenix Contact, Weidmüller. We verify mounting space, cooling and EMC.
Machines and cells — example applications
Assembly, dispensing, gluing and sealing; end-of-line testing, leak testing and measurement. Manual, semi-automatic and robotic cells. Documentation and acceptance criteria are defined for each project.
Service — support scope
Control, drive and safety diagnostics, periodic inspections, component replacement, software updates, configuration backups and post-repair testing. Remote parameter monitoring and predictive diagnostics depend on the agreed scope.
One cell. A connected process.
The robot is part of a larger system. Choose an element in the diagram to see how it connects to the others.
Robot
The robot arm carries out programmed movements. Selection and integration follow the task, working space and interaction with other equipment.
Motion · reach · integration
Tool
A gripper or process tool connects the robot to the task. The solution depends on the workpiece and the operation.
Workpiece · handling · operation
Controls
The PLC, HMI and control cabinet coordinate the equipment. Software connects the signals and sequences across the cell.
PLC · HMI · control cabinet
Safety
Guarding, access and control functions are considered alongside the process. The specific arrangement requires assessment for the application.
Guarding · access · control functions
Process
Workpiece feeding, the operation and unloading must work together. The cell is built around the actual production task.
Feeding · operation · unloading
Technical
scope.
Automation
Control / Safety / Machine vision / Drives
Robotics
Welding / Palletising / CNC / Pick-and-place
Machinery
Assembly / Testing / Modernisation
Service
Diagnostics / Support / Modernisation
From analysis to commissioning.
Each stage builds on the last. Explore the work from understanding the process to supporting the completed system.
Analysis
We examine the process, production needs and integration conditions to define the scope of the solution.
Process · requirements · scope
Design
We combine mechanical design with automation and equipment selection. The cell layout follows the production task.
Mechanics · automation · equipment selection
Integration
We bring robots, controls and process equipment together as one system, preparing the software and connections between them.
Robots · controls · process equipment
Commissioning
We commission the system under process conditions, checking how the equipment works together and refining the cell sequence.
Commissioning · testing · adjustment
Support
We provide technical support after implementation, including servicing, diagnostics and modernisation of machines and systems.
Service · diagnostics · modernisation
Technologies
we work with.
Yaskawa
Omron
Fronius
Siemens
Baumüller
Authorised partner of Yaskawa and Omron. Authorised Fronius integrator. Siemens and Baumüller technologies.
Have a process
that could work better?
Let’s discuss automation, robotics or machine building.