The product arrives, has to be picked up, placed on a pallet, and the action repeated. Palletising often involves the same movements performed hundreds or thousands of times. That makes it worth considering robotisation. The prerequisites, however, are a predictable product feed and a properly organised end of line, rather than simply buying a robot arm.
A palletising robot can form part of a cell that handles different formats and stacking patterns. Not every task needs this solution, however. First, we should examine production volume, line speed, package weight and the operator’s work. A sound analysis identifies both opportunities for automation and situations where a simpler organisational change is enough.
1. Process repeatability
A robot needs a defined pick-up position and an agreed way of placing the product. If packages arrive in unpredictable positions, a positioning or detection system must be designed. A stable feed makes the cycle easier to execute. Problems with spacing, damaged cartons or product orientation need to be understood before equipment is selected.
The pallet itself also matters: its location, condition and permissible deviations. The cell should have a defined method of detecting when it is ready to receive products. We cannot assume that every pallet is always in exactly the same position. Pallet clamping or location, and the method of changeover, are part of the process concept.
- 01Product
- 02Pick-up
- 03Rotation / orientation
- 04Pallet
Illustrative process diagram.
The analysis should map the complete cycle: conveying, pick-up, positioning, placement and return. Sometimes the main constraint is the incoming product flow or the removal of full pallets. A fast robot will not improve throughput if it is waiting for the next package or has nowhere to place the next product.
2. Working across successive shifts
A repetitive end-of-line task can occupy the team for much of the day. A robotic cell can perform these cycles across successive production shifts when the process is properly organised and supervised. This does not mean operation without people: pallets still need to be supplied, finished loads removed and events addressed.
It is worth checking whether palletising limits the speed of the whole line or is just one of the operator’s many tasks. If the operator also handles packaging and inspection, robotisation will change the allocation of work. This must be planned so that the problem is not passed to an adjacent station. Observations from different shifts are useful, rather than relying solely on the best-performing period of production.
When comparing options, allow for planned breaks, material replenishment and operator availability. A machine’s catalogue capacity is not the same as the output of the whole line. A useful design is based on the actual product flow and the required stacking arrangement.
3. Ergonomics: less repetitive handling
Manual stacking involves repeating similar movements, often as the pallet height changes. Package weight, pick-up frequency and placement distance affect the organisation of the station. A robot can take over these repetitive tasks. The operator then handles operation, preparation and inspection within the defined scope.
There is no need to promise specific health benefits to recognise the significance of this change. It is enough to describe the operator’s actual tasks and assess how the work is performed. Remember that automation also creates new activities: changing pallets, responding to alarms and accessing equipment. These also require a well-designed cell.
Robot selection is not based on product weight alone. Gripper weight, the gripping method, reach and motion conditions also matter. Equipment should not be selected at the limit of a single parameter without analysing the complete application. The manufacturer and integrator should verify a configuration suitable for the task.
4. Different products and pallet patterns
If the line handles several formats, recipes need to be organised. Each should define the product, stacking pattern and required cell settings. Changing a program does not automatically resolve the need for a different gripper, product feed or load height. Planned variants are best assessed at the concept stage.
Layer patterns depend on the dimensions of the product and pallet, as well as stability and transport requirements. There is no single correct arrangement for every package. Interlayers, orientation and permissible overhang must be agreed with the people responsible for the product and logistics.
Illustrative diagram. The stacking pattern and load stability must be checked with the actual product.
The diagram above shows the principle of building successive layers. It is a technical illustration, rather than a recommended packing pattern for a particular product. The actual arrangement must be checked with regard to the load-bearing capacity of the packaging, load securing and transport conditions. Correct robot movement alone does not confirm the stability of the finished load.
5. What needs to be analysed before selecting a robot?
First, describe the product and how it behaves. A carton, bag and rigid component require different pick-up methods. Packaging deformation, contact area and permissible pressure all matter. Gripping trials should use representative products, rather than only a sample prepared for a demonstration.
- Weight and dimensions: the range of variants and how the product can be gripped.
- Line speed: the actual feed rate, spacing and temporary surges.
- Number of formats: the frequency of changes and the changeovers required.
- Pallet height: the finished load, tool access and space constraints.
- Product feed: orientation, position and the product-ready signal.
- Pallet changeover: the supply of empty pallets, removal of full pallets and any interlayers.
- Space and safety: people’s movements, transport and maintenance access.
Packaging drawings, line photographs and descriptions of pallet patterns are useful for the analysis. It is also worth recording the complete manual cycle and pallet changeover. The recording should show situations in which production slows down. This allows the concept to address the real problem, rather than simply demonstrate a robot placing a carton impressively.
6. Safety and integration with the line
A palletising cell is a system comprising the robot, conveying equipment, gripper and placement areas. Safeguarding is determined by the risk assessment of the complete system. Pallet changeover, operator access and maintenance tasks must be considered. Using a particular type of robot does not, by itself, determine the safety of the application.
Communication with the preceding stage is important. What happens when a pallet is full or the robot cannot pick up a product? Does the line stop in a controlled way? How is the operator informed of the cause? These questions should be answered in the control design and agreed procedures, rather than left until commissioning.
7. When is a robot unnecessary?
Low volume, infrequent product placement or a constantly changing task may not justify a complete robotic cell. In such cases, compare simpler solutions: improving the feed, repositioning the pallet or providing handling assistance. Not every repetitive activity needs to become a robotisation project immediately.
Space and the organisation of logistics also matter. If pallet exchange and safe operation cannot be accommodated, changes are needed before the concept can proceed. An honest analysis may conclude that the end of the line needs to be organised first. This is a useful result, even if it does not immediately lead to buying a robot.
Even at higher volumes, the full costs and requirements still need to be compared. The robot, gripper, conveying equipment, safeguarding, integration and operation together make up the investment. A payback period should not be promised without production and downtime data. Technical feasibility and economic viability are two separate questions.
Frequently asked questions
Can one gripper handle every product?
That depends on the formats, weight and gripping surface. The feasibility of using a common tool must be checked; similar-looking packaging alone is not enough.
Can a robot change the pallet pattern?
These functions are available in palletising systems. However, the range of recipes and the changeover method must suit the actual products and cell configuration.
Does all logistics need to be automated at once?
No, but the tasks that remain with the operators must be defined. Manual pallet changeover also requires time, access and a safe process to be planned.
Summary
A robot makes sense where palletising is a repetitive, well-defined task and the whole cell can be properly operated. First, we should check the product, feed, layer patterns and pallet changeover. Want to assess your process? Discuss your project with us and explore the possibilities for robotisation.
Technical sources
Yaskawa: PalletSolver — configuring palletising patterns and tools. This manufacturer material describes an example of software. It does not state that RYFA has particular equipment or confirm the project shown in the photograph.